EasyStreet Online Services

  Windows NT 4.0 Dial-Up Instructions

EasyStreet > Support > Dial-Up > Local > Windows NT 4.0 Info
  1. Install and configure your modem
    as detailed in the modem documentation.
  2. Install Remote Access Service and Dial-Up Networking
    per your Windows NT 4.0 instructions. Double-click on Dial-Up Networking and select New.....
    1. Enter EasyStreet as the phonebook entry name.
      phonebook wizard

      Select Next.
    2. Server dialog.
      Check I am calling the Internet.
      server dialog

      Select Next.
    3. Modem or adapter dialog.
      Select your modem
      modem dialog

      Select Next.
    4. Phone number dialog.
      Enter the most appropriate number from the Access Number list.
      phone number dialog

      Select Next then Finish.
  3. Now we need to adjust the properties.
    Select the EasyStreet entry and select More....edit entry and modem properties. Fill in the entries in each of the tabs as below.
    • Basic tab.
      Entry name: EasyStreet
      Phone number: (from the list at left)
      Dial using: (your modem)
      basic tab

    • Configure... tab
      Check Enable hardware flow control
      Check Enable modem error control
      Check Enable modem compression
      configure tab

    • Server tab
      Network Protocols Check TCP/IP
      Check Enable software compression
      Check Enable PPP LCP extensions
      Click on TCP/IP Settings...
      server tab

    • TCP/IP Settings
      Check Server assigned IP address
      Check Specify name server addresses
      Primary DNS: 69.30.0.200
      Secondary DNS: 209.162.195.5
      Check Use IP header compression
      Check Use default gateway on remote network
      Click OK
      TCP/IP settings

    • Script tab
      After dialing (login) Check None
      script tab

    • Security tab
      Check Accept any authentication including clear text
      security tab

    • X.25 tab
      No entries for this tab.
  4. In the Portland Area set up 10-Digit Dialing
    Follow the Windows NT 10-Digit Dialing instructions.
  5. That's it.
    Select Dial.... from the Dial-Up Networking dialog and fill in your Access Username and Access Password. The DOMAIN entry should be empty.
    Connect to... window

  6. Set up your Email Software.

Copyright © 2000-2002 EasyStreet Online Services, Inc. All rights reserved.
EasyStreet and the EasyStreet logo are registered trademarks of EasyStreet Online Services. Certain other names, logos, designs, titles, words or phrases on this site may constitute trademarks, servicemarks or tradenames of EasyStreet or other entities which may be registered in certain jurisdictions.