Windows ME Dial-Up Instructions

First, is Dial-Up Networking Installed?

1. Click on the Start Button, then choose Settings then choose Dial Up Networking.
2. If you don't see it, Install Dial-Up Networking

Installing Dial-Up Networking

1. Double-click on My Computer (on your desktop), then double-click on Control Panel, then double-click on Add/Remove Programs
2. In the Add/Remove Programs window, click on the Windows Setup tab
3. You will see a list of Windows components, in that list double-click on Communication
4. Click (check) the box next to Dial-Up Networking
5. Click OK twice. and have your Windows CD ready.
6. Once windows is finished installing Dial-Up networking, make a new Dial-Up Networking Connection

Make New Connection under Dial-Up Networking

1. Click on Start, then Settings, then Dial-Up Networking.
2. Double-click on Make New Connection, then choose Next
   
   
   
3. Enter EasyStreet as the name. Select your Modem,
   then click Next.
   
   
   
4. Enter the Portland access number 503-677-2100. Or use a more appropriate number from the Access Number list.
   
   
   
5. Click on Finish.
   
   
   
6. Now continue with the following...

Do-It-Yourself (DUN Properties)

1. You should be looking at the Dial Up Networking window with an EasyStreet connection icon in it. RIGHT-click on the EasyStreet icon and select Properties.
   EasyStreet connection Properties window
   
   
   
2. Click on the Networking tab.
   Make sure the settings look like the ones below.
   
   
   
3. Click on the TCP/IP Settings tab and enter these addresses.
   
   
   

Connecting to EasyStreet

Double-click on the EasyStreet icon and enter
User name: your Access Username from your Account Information
Password: your Access Password from your Account Information
then click Connect

Oregon users must set the dialer to 10 digit dialing

1. Click on Dial Properties
   
   
   
2. Then click on Area Code Rules
   Check Always dial the area code (10-digit dialing).