EasyStreet Online ServicesNETOPIA R5300 FRAME RELAY ROUTER


EasyStreet > Support > Routers > Netopia R5300 Frame Relay Router > Check Connectivity


Please see this page regarding assumptions made about this router.

OBJECTIVE:
The screens below will show you how to check the router's connectivity status over the frame relay circuit.

NOTE:
If the "Ready" light on the front of the router does not turn solid green within 5 minutes of the router being turned on and having the frame line plugged in to the LINE 1 port on the back of the router, then there is something wrong with the frame circuit.  Call your telephone company for troubleshooting.  The "Ready" light will turn solid green if it sees frame relay signals on the circuit, regardless of the router being configured or not.

01.  From the MAIN MENU highlight "Statistics & Logs..." and hit the ENTER key.

02.  Select "WAN Event History..." and hit the ENTER key.

03.  The screen above is what the status of the router looks like out of the box, unconfigured and unplugged from the frame circuit.  The most recent entry is at the top of the page.

04.  The screen above is what the status of the router looks like out of the box, unconfigured but the frame line is plugged in to the LINE 1 port on the back of the router.  The most recent entry is at the top of the page.

05.  The screen above is what the status of the router looks like out of the box, configured and the frame line is plugged in to the LINE 1 port on the back of the router.  The most recent entry is at the top of the page.

BACK TO THE NETOPIA R5300 INDEX

Copyright © 2002 EasyStreet Online Services, Inc. All rights reserved.
EasyStreet and the EasyStreet logo are registered trademarks of EasyStreet Online Services. Certain other names, logos, designs, titles, words or phrases on this site may constitute trademarks, servicemarks or tradenames of EasyStreet or other entities which may be registered in certain jurisdictions.